Items where Subject is "Engineering"

A

Adewuyi, A. S. and Lasisi, K. H. (2019) Design of Normal Concrete Mix Based on Both Building Research Establishment and American Concrete Institute Method of Mix Design. Journal of Engineering Research and Reports, 6 (3). pp. 1-7. ISSN 2582-2926

Al-Smairan, Mohammad and Al-Nhoud, Omar (2019) Feasibility Study to Install Wind Farm in Bab Al-Hawa, Irbid, Northwest of Jordan. Modern Mechanical Engineering, 09 (01). pp. 30-48. ISSN 2164-0165

Assogba, Ognadon and Karim Mbodji, Abdoul and Diagne, Salick and Karim Diallo, Abdou (2021) Design of a Rectenna in 2.45 GHz Band Frequency for Energy Harvesting. Energy and Power Engineering, 13 (09). pp. 333-342. ISSN 1949-243X

B

Barczak, Agnieszka (2021) COVID-19 Pandemic—Financial Consequences for Polish Airports—Selected Aspects. Aerospace, 8 (11). p. 353. ISSN 2226-4310

Bhide, Kalyani and Siddappaji, Kiran and Abdallah, Shaaban and Roberts, Kurt (2021) Improved Supersonic Turbulent Flow Characteristics Using Non-Linear Eddy Viscosity Relation in RANS and HPC-Enabled LES. Aerospace, 8 (11). p. 352. ISSN 2226-4310

Blagojević, Branko and Žiha, Kalman (2012) Probabilistic Indicators of Structural Redundancy in Mechanics. World Journal of Mechanics, 02 (05). pp. 229-238. ISSN 2160-049X

Boateng, Eric and Kankam, Charles K. and Danso, Anthony K. and Ayarkwa, Joshua and Acheampong, Alex (2023) The Effect of Using Waste Automobile Tires and Palm Kernel Shells as Coarse Aggregates in Concrete on Tensile Strength and Failure Modes. Journal of Engineering Research and Reports, 24 (8). pp. 1-11. ISSN 2582-2926

Boubou, Bagre and Kalawole Muritala, Ibrahim and Makinta, Boukar and Tizane, Daho and Guy Christian, Tubreoumya and Jacques, Nebie and Téré, Dabilgou and Antoine, Bere and Rabani, Adamou (2021) Review on Thermocline Storage Effectiveness for Concentrating Solar Power Plant. Energy and Power Engineering, 13 (10). pp. 343-364. ISSN 1949-243X

Buchanan, Weston P. and de Jong, Maxim and Agrawal, Rachana and Petkowski, Janusz J. and Arora, Archit and Saikia, Sarag J. and Seager, Sara and Longuski, James (2022) Aerial Platform Design Options for a Life-Finding Mission at Venus. Aerospace, 9 (7). p. 363. ISSN 2226-4310

C

Chen, Deshen and Zhang, Yan and Qian, Hongliang and Zhang, Kai and Wang, Huajie (2021) An Effective Form Analysis Approach for Designing and Optimizing a Cable-Net Structure of a Giant Active Reflector. Aerospace, 8 (9). p. 269. ISSN 2226-4310

Chen, Xuanyi and Jing, Xiaofei and Cai, Hai and Wang, Yijun and Ye, Luhua and Liu, Wei (2021) Hydraulic Erosion Rate of Reinforced Tailings: Laboratory Investigation and Prediction Model. Advances in Materials Science and Engineering, 2021. pp. 1-13. ISSN 1687-8434

Chicurel, Ricardo and Ascanio, Gabriel (2019) Coupling for Parallel Non-Collinear Shafts. Modern Mechanical Engineering, 09 (03). pp. 57-63. ISSN 2164-0165

Chung, Kung-Ming and Su, Kao-Chun and Chang, Keh-Chin (2021) Micro-Vortex Generators on Transonic Convex-Corner Flow. Aerospace, 8 (9). p. 268. ISSN 2226-4310

D

Dai, Ye and Xiang, Chaofang and Zhang, Yuan and Jiang, Yupeng and Qu, Wenyin and Zhang, Qihao (2022) A Review of Spatial Robotic Arm Trajectory Planning. Aerospace, 9 (7). p. 361. ISSN 2226-4310

Diagne, Salick and Karim Farota, Abdou and Assogba, Ognadon and Diop, Bouya and Val, Thierry (2021) Solar Energy Recovery and Storage System for Powering Wireless Communicating Nodes. Energy and Power Engineering, 13 (12). pp. 377-391. ISSN 1949-243X

Djami, Aslain Brisco Ngnassi and Nzié, Wolfgang and Yamigno, Serge Doka (2020) Disassembly Evaluation in Design of a System Using a Multi-Parameters Index. Modern Mechanical Engineering, 10 (01). pp. 1-16. ISSN 2164-0165

Dölle, Klaus and Darius, Jacob and Medina, Rodrigo Castillo and Henkler, Owen and Day, Jonathan (2023) A Study on Laboratory Type Paper Machine Using Nano Fibrillated Cellulose from Recycled Old Corrugated Containerboard as Bio Additive in Board Production. Journal of Engineering Research and Reports, 24 (5). pp. 46-55. ISSN 2582-2926

E

Ebale, Louis Okotaka and N’kaya, Guy Dieudonne Moukandi and Kombo, Wilfrid and Kibongani, Feldha (2020) Water Production by Condensation of Wet Air. Modern Mechanical Engineering, 10 (02). pp. 17-24. ISSN 2164-0165

F

Fioriti, Marco and Della Vecchia, Pierluigi and Donelli, Giuseppa (2022) Effect of Progressive Integration of On-Board Systems Design Discipline in an MDA Framework for Aircraft Design with Different Level of Systems Electrification. Aerospace, 9 (3). p. 161. ISSN 2226-4310

Fleischmann, Dominique and Könözsy, László (2021) On a Novel Approximate Solution to the Inhomogeneous Euler–Bernoulli Equation with an Application to Aeroelastics. Aerospace, 8 (11). p. 356. ISSN 2226-4310

G

Gajanayake, Surath and Bandara, Saman and Sugathapala, Thusitha (2023) A novel approach to estimate power demand of auxiliary engine loads of light duty vehicles. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

H

Hossain, Sazzad and Rahman, Mohammad Maksudur (2021) Solar Energy Prospects in Bangladesh: Target and Current Status. Energy and Power Engineering, 13 (08). pp. 322-332. ISSN 1949-243X

I

Iyasara, Adindu C. and Nduka, Jonathan A. and Irogbele, Gideon C. (2023) Design and Fabrication of Mechanical Sieve Shaker for Particle Size Analysis of Ceramics. Journal of Engineering Research and Reports, 24 (8). pp. 12-19. ISSN 2582-2926

J

Ji, Zeng and Bo, Yuan and Qi, Feng and Yan, Chen (2019) Design and Strength Verification of LNG Cargo Enclosure System FSP Type. Modern Mechanical Engineering, 09 (02). pp. 49-56. ISSN 2164-0165

Juliawan, Nadhie and Chung, Hyoung-Seog and Lee, Jae-Woo and Kim, Sangho (2021) Estimation and Separation of Longitudinal Dynamic Stability Derivatives with Forced Oscillation Method Using Computational Fluid Dynamics. Aerospace, 8 (11). p. 354. ISSN 2226-4310

K

Kama, Ibrahima and Sow, Mamadou Lamine and Kpode, Kodjo and Mbow, Cheikh (2018) Effects of the Reynolds and Weissenberg’s Numbers on the Stability of Linear Pipe Flow of Viscous Fluid. Modern Mechanical Engineering, 08 (04). pp. 264-277. ISSN 2164-0165

Karpat, Fatih and Ekwaro-Osire, Stephen and Karpat, Esin (2012) A Computer Program for Dynamic Load Simulation of Spur Gears with Asymmetric and Symmetric Teeth. World Journal of Mechanics, 02 (05). pp. 239-245. ISSN 2160-049X

Khan, Shahab Ud-Din and Shu, Yonglu and Khan, Salah Ud-Din (2012) Stability Control of Stretch-Twist-Fold Flow by Using Numerical Methods. World Journal of Mechanics, 02 (06). pp. 334-338. ISSN 2160-049X

Kim, Eric J. and Perez, Ruben E. (2021) Neuroevolutionary Control for Autonomous Soaring. Aerospace, 8 (9). p. 267. ISSN 2226-4310

Kulkarni, Mohan and Dingare, Sunil and Kulkarni, Chandrakant (2023) Design and development of the solar cycloidal thermal concentrator and tapered receiver assembly along with theoretical evaluation of system performance. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

L

Lana, A. R. and Idusuyi, N. (2019) The Design, Construction and Testing of an Intelligent Device for Coating Flaws and Crack Detection in Pipelines. Journal of Engineering Research and Reports, 6 (3). pp. 1-13. ISSN 2582-2926

Lee, Jaewon and Lee, Sang Gon and Kang, Sang Hun and Namkoung, Hyuck-Joon (2022) Numerical Study on the Non-Oscillatory Unstarted Flow in a Scramjet Inlet-Isolator Model. Aerospace, 9 (3). p. 162. ISSN 2226-4310

Li, Qiang and Kong, Dezhong and Wu, Guiyi and Wen, Zhijie and Shang, Yuqi and Song, Zhengyang (2021) Influence Factors’ Analysis of the Face-End Roof Leaks Exposed to Repeated Mining Based on Multiple Linear Regression. Advances in Materials Science and Engineering, 2021. pp. 1-15. ISSN 1687-8434

Li, Yinkang and Li, Danyi and Zhu, Wenshan and Sun, Jun and Zhang, Xiaolong and Li, Shuang (2022) Constrained Motion Planning of 7-DOF Space Manipulator via Deep Reinforcement Learning Combined with Artificial Potential Field. Aerospace, 9 (3). p. 163. ISSN 2226-4310

Luo, Yuelong and Jiang, Xiuqiang and Zhong, Suchuan and Ji, Yuandong and Sun, Guohao (2022) Multisatellite Task Allocation and Orbit Planning for Asteroid Terminal Defence. Aerospace, 9 (7). p. 364. ISSN 2226-4310

M

Ma, Jianfeng and Xin, X. J. (2012) Elastoplastic Large Deformation Using Meshless Integral Method. World Journal of Mechanics, 02 (06). pp. 339-360. ISSN 2160-049X

Meireles, Rúben and Magalhães, Leandro and Silva, André and Barata, Jorge (2021) Description of a Eulerian–Lagrangian Approach for the Modeling of Cooling Water Droplets. Aerospace, 8 (9). p. 270. ISSN 2226-4310

Montero, Félix E. and Rezende, Rodrigo A. and da Silva, Jorge V. L. and Sabino, Marcos A. (2019) Development of a Smart Bioink for Bioprinting Applications. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

Mukras, Saad M. S. and Omar, Hanafy M. (2021) Development of a 6-DOF Testing Platform for Multirotor Flying Vehicles with Suspended Loads. Aerospace, 8 (11). p. 355. ISSN 2226-4310

N

Nwakuba, N. R. and Chukwuezie, O. C. and Uzoigwe, F. C. and Chukwu, P. (2019) Friction Coefficients of Local Food Grains on Different Structural Surfaces. Journal of Engineering Research and Reports, 6 (3). pp. 1-9. ISSN 2582-2926

P

Padal Jr, Christopher M. and May L. Salado, Mary Jean and P. Sobejana, Noel (2019) SPAMAST Smart Garbage Bin Monitoring System Using Wireless Sensor Network. Journal of Engineering Research and Reports, 6 (3). pp. 1-16. ISSN 2582-2926

Pineda, Marcela del Carmen Montiel and Caballero-Morales, Santiago-Omar (2023) A Comparison of Inventory Strategies for a Manufacturer within the Air Conditioning Industry. Journal of Engineering Research and Reports, 25 (3). pp. 13-25. ISSN 2582-2926

R

Radwan, Nasser A. A. and Bahloul, Khaled M. M. (2019) Correlation between Swelling Pressure and Free Swell of Greater Cairo City Expansive Soils – A Case Study. Journal of Engineering Research and Reports, 6 (3). pp. 1-6. ISSN 2582-2926

Ragunath, S. and Shankar, A. N. and Meena, K. and Guruprasad, B. and Madhu, S. and Rakesh, N. and Hariprabhu, M. and Balamuralitharan, S. and Daniel, Nahom and Chelladurai, Samson Jerold Samuel (2021) Multiobjective Optimization of Mechanical Properties on Sisal-Glass Fiber-Reinforced Hybrid Composites Using Response Surface Methodology and LINGO Analysis. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Raheem, Akeem Ayinde and Otolorin, Samuel Ayooluwa and Adebiyi, Samad Olaide (2025) Influence of Sodium Silicate on the Properties of Wood Ash Blended Cement Concrete. Journal of Engineering Research and Reports, 27 (1). pp. 76-91. ISSN 2582-2926

Rostami, Mohsen and Bardin, Julian and Neufeld, Daniel and Chung, Joon (2022) A Multidisciplinary Possibilistic Approach to Size the Empennage of Multi-Engine Propeller-Driven Light Aircraft. Aerospace, 9 (3). p. 160. ISSN 2226-4310

S

Sall, Mamadou and Kebe, Abdoulaye and Gueye, Ibrahima and Diop, Moustapha (2021) Comparative Study between the PID Regulator and the Fuzzy Regulator Applied to the Operation of a Brushless DC Motor. Energy and Power Engineering, 13 (11). pp. 365-376. ISSN 1949-243X

Shi, Hengtao (2021) A Parametric Blade Design Method for High-Speed Axial Compressor. Aerospace, 8 (9). p. 271. ISSN 2226-4310

Shura, Megersa Wodajo and Dong, Mingdong (2021) A Simple Method to Differentiate between Free-Carrier Recombination and Trapping Centers in the Bandgap of the p-Type Semiconductor. Advances in Materials Science and Engineering, 2021. pp. 1-13. ISSN 1687-8434

Sun, Zhicheng and Li, Shipeng and Zhang, Huan and Lei, Haiming and Song, Xiaodong (2022) Design and Analysis of a Novel Floating Docking Mechanism for On-Orbit Refueling. Aerospace, 9 (7). p. 365. ISSN 2226-4310

Swaminathan, N. (2019) Physical Insights on MILD Combustion From DNS. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

T

Tang, Haoze (2019) Koopman Reduced Order Control for Three Body Problem. Modern Mechanical Engineering, 09 (01). pp. 20-29. ISSN 2164-0165

Tiwari, Madhur and Coyle, Eric and Prazenica, Richard J. (2022) Direct-Adaptive Nonlinear MPC for Spacecraft Near Asteroids. Aerospace, 9 (3). p. 159. ISSN 2226-4310

W

Wu, Shangwei and Wu, Dongming and Jing, Xiaofei and Chen, Xuanyi and Wang, Yijun and Ye, Luhua and Jiang, Song (2021) Rainfall Erosion Predictions for Artificial High-Filled Embankment with Reinforcement. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Y

Yong, Wentao (2019) Study on Aerodynamic Characteristics of Supersonic Airfoil. Modern Mechanical Engineering, 09 (01). pp. 13-19. ISSN 2164-0165

Yu, Jiawen (2018) Design and Optimization of Wing Structure for a Fixed-Wing Unmanned Aerial Vehicle (UAV). Modern Mechanical Engineering, 08 (04). pp. 249-263. ISSN 2164-0165

Z

Zacharof, Nikiforos and Özener, Orkun and Özkan, Muammer and Kilicaslan, Abdullah and Fontaras, Georgios (2019) Simulating City-Bus On-Road Operation With VECTO. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

Zavala, Bryan Abel and McCarthy, James E. and Harris, Thomas (2023) Burner based thermal management approach utilizing in-exhaust burner technology with a CDA equipped engine. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Zhang, Zhang and Deng, Lei and Feng, Jiaqi and Chang, Liang and Li, Dong and Qin, Yilin (2022) A Survey of Precision Formation Relative State Measurement Technology for Distributed Spacecraft. Aerospace, 9 (7). p. 362. ISSN 2226-4310

Zhao, Junfeng and Yu, Song (2012) Effects of Residual Stress on the Hydro-Elastic Vibration of Circular Diaphragm. World Journal of Mechanics, 02 (06). pp. 361-368. ISSN 2160-049X